ltm message-routing generic peer¶

ltm message-routing generic peer(1) BIG-IP TMSH Manual ltm message-routing generic peer(1)

NAME
peer - Configures a peer for routing generic message protocol messages.

MODULE
ltm message-routing generic

SYNTAX
Configure the peer component within the ltm message-routing generic module using the syntax shown in the
following sections.

CREATE/MODIFY
create peer [name]
modify peer [name]
options:
app-service [[string] | none]
auto-initialization [ enabled | disabled ]
auto-initialization-interval [integer]
connection-mode [ per-peer | per-blade | per-tmm | per-client | per-client-per-blade |
per-client-per-tmm | per-peer-alternate-tmm | per-client-alternate-tmm ]
description [string]
number-connections [integer]
pool [name]
ratio [integer]
transport-config [ transport-config ]

edit peer [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties

DISPLAY
list peer
list peer [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition

DELETE
delete peer [name]

DESCRIPTION
You can use the peer component to manage a named generic message peer. A peer specifies the pool for the
generic message parser to use as the destination for generic message routes. You can also use the peer
component to specify how many connections the parser creates to a remote host and what transport the parser
uses to establish the connection.

EXAMPLES
create peer my_peer { pool my_pool transport { type virtual name my_vip } }

Creates a generic message peer named my_peer which uses the settings of my_vip to establish a connection with
a pool member from pool my_pool.

OPTIONS
app-service
Specifies the name of the application service to which the object belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the object. Only the application service can modify or delete the object.

auto-initialization
If enabled, the BIGIP will automatically create outbound connections to the active pool members in the
specified pool using the configuration of the specified transport-config. For auto-initialization to
attempt to create a connection, the peer must be included in a route that is attached to a router
instance. For each router instance that the peer is contained in, a connection will be initiated. The
auto-initialization logic will verify at a configurable interval if the a connection exists between the
BIG-IP and the pool members of the pool. If a connection does not exist, it will attempt to reestablish
one. The default is disabled.

auto-initialization-interval
Specifies the interval (in milliseconds) that attempts to initiate a connection occur. Valid ranges are
from 500ms to 65535ms. The default is 5000ms.

connection-mode
Specifies how the number of connections per host is limited. Note a host (specified in the referred pool)
may exist more than one peer object, and those peer objects may have different settings for connection-
mode and number_connections. Thus, these settings specify how messages are routed through this peer are
distributed between a set of connections, not the maximum number of connections to a specified host. The
default value is per-peer.

per-peer
Specifies the number of connections to a remote host.

per-blade
Specifies the number of connections to a remote host per blade in the cluster.

per-tmm
Specifies the number of connections to a remote host per TMM in the system.

per-client
Specifies the number of connections to a remote host per client connection.

per-client-per-blede
Specifies the number of connections to a remote host per client connection for each blade.

per-client-per-tmm
Specifies the number of connections to a remote host per client connection for each tmm.

per-peer-alternate-tmm
Specifies the number of connections to a remote host. Any new connections will be opened on an
alternate TMM to spread CPU usage.

per-client-alternate-tmm
Specifies the number of connections to a remote host per client connection. Any new connections will
be opened on an alternate TMM to spread CPU usage.

description
User defined description.

number-connections
Specifies the distribution of connections between the BIG-IP system and a remote host. The default value
is 1.

pool Specifies the name of the pool to which the generic parser routes messages.

ratio
Specifies the ratio the generic message parser uses to select a peer from a list of peers for the ltm
message-routing generic route. The default value is 1.

transport-config
Specifies the name of the transport configuration (ltm message-routing generic transport-config) the
message router uses to create an outgoing connection.

SEE ALSO
create, delete, edit, glob, list, ltm virtual, modify, regex, tmsh, ltm message-routing generic route ltm
message-routing generic protocol

COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

BIG-IP 2019-11-20 ltm message-routing generic peer(1)