sys log-config destination remote-high-speed-log
sys log-config destination remote-high-speed-log(1BIG-IP TMSH Manusys log-config destination remote-high-speed-log(1)
NAME
remote-high-speed-log - Sends received messages to a specified pool.
MODULE
sys log-config destination
SYNTAX
Configure the Remote High Speed Log component within the sys log-config destination module using the syntax
shown in the following sections.
CREATE/MODIFY
create remote-high-speed-log [name]
modify remote-high-speed-log [name]
options:
all
app-service [[string] | none]
description [string]
distribution [ adaptive | balanced | replicated ]
pool-name [ string ]
protocol [ tcp | udp ]
DISPLAY
list remote-high-speed-log
list remote-high-speed-log [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
DELETE
delete remote-high-speed-log [name]
Note: You must remove all references to a destination before you can delete the destination. Default
destinations may not be deleted.
DESCRIPTION
You can use this destination component to create Remote High Speed Log forwarding destinations for the common
logging interface.
EXAMPLES
create remote-high-speed-log my_dest pool-name my_pool
Creates a destination named my_dest which forwards to the pool my_pool.
delete remote-high-speed-log my_dest
Deletes the destination named my_dest. Destinations cannot be deleted when in use by a publisher or another
destination.
list remote-high-speed-log my_dest
Displays properties of the destination named my_dest.
OPTIONS
all Specifies that you want to modify all of the existing components of the specified type.
app-service
Specifies the name of the application service to which the destination belongs. The default value is
none. Note: If the strict-updates option is enabled on the application service that owns the object, you
cannot modify or delete the destination. Only the application service can modify or delete the
destination.
description
User defined description.
distribution
Specifies the distribution method used by the Remote High Speed Log destination to send messages to pool
members. The default method is adaptive: connections to pool members will be added as required to provide
enough logging bandwidth. This can have the undesirable effect of logs accumulating on only one pool
member when it provides sufficient logging bandwidth on its own. balanced sends each successive log to a
new pool member, balancing the logs among them according to the pool's load balancing method. replicated
replicates each log to all pool members, for redundancy.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.
pool-name
Specifies the ltm pool that receives messages from the Remote High Speed Log destination. This option is
required for the create command.
protocol
Specifies the protocol used to send messages to the specified pool. The default value is tcp. The options
are tcp and udp.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
SEE ALSO
create, delete, glob, list, modify, regex, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008, 2012-2013. All rights reserved.
BIG-IP 2014-12-18 sys log-config destination remote-high-speed-log(1)