sys sflow global-settings http
sys sflow global-settings http(1) BIG-IP TMSH Manual sys sflow global-settings http(1)
NAME
http - Manages the global HTTP sFlow configuration on the BIG-IP system.
MODULE
sys sflow global-settings
SYNTAX
Configure the http component within the sys sflow global-settings module using the syntax shown in the
following sections.
MODIFY
modify http
options:
description [string]
poll-interval [integer]
sampling-rate [integer]
DISPLAY
list http
options:
all-properties
non-default-properties
one-line
DESCRIPTION
You can use the http component to modify or list the global HTTP sFlow configuration on the BIG-IP system.
Note: You can modify the global HTTP sFlow configuration on the BIG-IP system, only if you are assigned either
the Resource Administrator or Administrator user role.
EXAMPLES
modify http poll-interval 60 sampling-rate 1500
Sets the poll-interval to 60 seconds and the sampling-rate to 1500 packets for all monitored HTTP data sources
on the BIG-IP system.
OPTIONS
description
User defined description.
poll-interval
Specifies the maximum interval in seconds between polling by the sFlow agent of all monitored HTTP data
sources on the BIG-IP system. The default value is 10.
sampling-rate
Specifies the ratio of packets observed at all HTTP data sources to the samples generated. For example, a
sampling rate of 2000 specifies that 1 sample will be randomly generated for every 2000 packets observed.
The default value is 1024.
SEE ALSO
list, modify, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2013. All rights reserved.
BIG-IP 2013-10-15 sys sflow global-settings http(1)